Edge Recording Manager For Mac

Q: How do I stop the DVR from beeping? A: The system is designed to alert you by beeping if it is not connected to the Internet. To disable the beeping, you can connect the system to the Internet. You can manually turn off the beeping if you prefer to not connect your security system to the Internet. Option 1 of 2: Connect the system to the Internet: Connect your system to your router using an Ethernet cable and then restart the system by turning it off and on with the power switch. Option 2 of 2: Manually turn off the beeping: • From the Main Menu, click and then click Event>Warning>Network. • Under Event Type, select Net Disconnect.

The G-Drive by G-Technology is a great USB-C hard drive for most people. It has 1TB of storage and you can find it for around $70. It features a quick drive speed of 7200RPM, with transfer rates of up to 136MB/s, thanks to USB 3.1. Comes in silver, as well as Apple-exclusive colors: gold, rose gold, and space gray. What type of usb drive for mac.

• Uncheck Enable. • Click OK to save changes.

Trusted Mac download Edge Recording Manager 1.0.0. Virus-free and 100% clean download. Get Edge Recording Manager alternative downloads.

Q: How do I set the DVR to record on motion only? A: Setting the DVR to only record motion events can dramatically increase the amount of time the hard drive can keep video recordings. Follow the steps below to set the DVR to record motion events only: Step 1 of 2: Enable motion detection on your cameras: • On the system, right-click and then click Main Menu. From the Main Menu, click and select Event>Motion>Motion Detect • Under Channel, select the channel you would like to set up.

• Check Enable to enable motion detection on the selected channel. • Repeat steps 2-3 for each channel you would like to enable motion detection on.

• Click OK to save changes. Step 2 of 2: Set up the recording schedule for motion only • From the Main Menu, click and then click Storage>Schedule>Record.

• Under Channel, select the channel you would like to configure or select All to set up the schedule for all channels. • Click next to All to link the recording schedules for all days. The icon for a day changes to when days are linked.

• Check Continuous to set up continuous recording. • Click and drag over one of the green lines to disable continuous recording. This will be automatically copied for all days. • Check MD to set up motion recording. • Click and drag on the schedule so the yellow line covers the entire day. This enables motion recording all day.

The schedule should look like the screen shown below. • Repeat steps 2-7 for additional channels you would like to set up. • Click OK to save changes. Q: What is FLIR Cloud™? A: FLIR Cloud™ is an exclusive cloud-enabled service that allows for remote access to your system over the Internet without requiring any network configuration, DDNS registration, or port forwarding. Each system includes a Device ID, a unique code that allows your system to handshake with Lorex’s servers for a secure, instant connection over the Internet.

The system supports remote access using PC, Mac, Android™, and iOS, and you can connect to your system for the first time on any smartphone or tablet by simply scanning the QR code. A computer is not required for the initial setup. Please note that an upload speed of 1Mbps or higher is required to enable video streaming over the Internet. Q: When I connect, I get the message “Current connection is connected via relay, the connection will be disconnected in 10 min.” What does that mean? A: This message indicates the system is connected using relay mode.

Relay mode works in the event that a hardware firewall or other security settings prevent direct peer-to-peer connection between the system and the viewing device. In relay mode, the video is sent from the system to the viewing device through the FLIR Cloud™ servers. Because of the high bandwidth usage in relay mode, the connection will be automatically disconnected after 10 minutes of continuous use. After being disconnected, you can reconnect to the system right away.

Q: The system is prompting me for a firmware upgrade. Is this required? A: Yes, the DVR firmware and software must be upgraded to the latest version to use the FLIR Cloud™ apps. For your convenience, when it is connected to the Internet, the system will automatically alert you if there is a firmware upgrade available. Once the firmware update is complete, check the to update the PC or Mac Client Software or check the Google Play Store for Android™ or the App Store for iOS for mobile app updates. Firmware upgrade message on DVR Firmware upgrade message on FLIR Cloud app NOTE: During the firmware upgrade process, do not unplug or power off the DVR. Firmware upgrades typically take between 5 and 10 minutes to complete.